APBS

Assoc. Prof. Dr.
Çağatay ELİBOL

Faculty of Science

Materials Science and Technology

SHORT CV

Education

2012 - 2018
Doktor

Technische Universität Chemnitz

Malzeme Bilimi ve Mühendisliği
2008 - 2011
Master

Universität Stuttgart

MALZEME BİLİMİ
2003 - 2007
Bachelor

KOCAELİ ÜNİVERSİTESİ

MÜHENDİSLİK FAKÜLTESİ, METALURJİ VE MALZEME MÜHENDİSLİĞİ BÖLÜMÜ

Academic Titles

2019
Assistenzprofessor

TÜRK-ALMAN ÜNİVERSİTESİ, TÜRKİYE

FEN FAKÜLTESİ, MALZEME BİLİMİ VE TEKNOLOJİLERİ BÖLÜMÜ
2018
Assistenzprofessor

Technische Universitaet Chemnitz-Zwickau, ALMANYA

Makina Mühendisliği Fakültesi, Malzeme Bilimi ve Mühendisliği
Lehrbeauftragte (r)

TÜRK-ALMAN ÜNİVERSİTESİ, TÜRKİYE

FEN FAKÜLTESİ, MALZEME BİLİMİ VE TEKNOLOJİLERİ BÖLÜMÜ
2012
Wissenschaftliche (r) Mitarbeiter (in)

Technische Universitaet Chemnitz-Zwickau, ALMANYA

Makina Mühendisliği Fakültesi, Malzeme Bilimi ve Mühendisliği

ACADEMIC STUDIES

  • International

    (2022) Effect of severe plastic deformation on the precipitation kinetics and the properties of CuCoNiBe alloys

    Authors: ELİBOL ÇAĞATAY, Index Type: SCI-Expanded kapsamındaki dergilerde yayımlanmış tam makale, Type: people.with_referee, Journal Name: Materials Today Communications, Number of Authors: 1, Month: Juni, Language: Englisch, Volume: 31, Doi: 10.1016/j.mtcomm.2022.103473, ISSN: 2352-4928, Access Type: Elektronisch, Article Link: http://dx.doi.org/10.1016/j.mtcomm.2022.103473 , Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Malzeme Bilimi>Metal Alaşımlar>Malzeme Karekterizasyonu>Severe plastic deformation,Precipitation kinetics,mechanical and physical properties ,Cu-Be alloys, Article Type: Originalartikel,

    (2022) Effect of water absorption and hydroxyapatite addition on mechanical and microstructural properties of dental luting cements

    Authors: ELİBOL ÇAĞATAY, Atalay Ender Göksen, SAĞIR KADİR, HAZAR AFİFE BİNNAZ, Index Type: SCI-Expanded kapsamındaki dergilerde yayımlanmış tam makale, Type: people.with_referee, Journal Name: Materials Testing, Number of Authors: 4, Month: Januar, Language: Türkisch, Volume: 64, Page: 303-313, Doi: 10.1515/mt-2021-2150, ISSN: 0025-5300, Access Type: Elektronisch, Article Link: http://dx.doi.org/10.1515/mt-2021-2150 , Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Malzeme Karekterizasyonu>Malzeme Bilimi>Kompozit Malzemeler, Article Type: Originalartikel,

    (2022) Numerical and experimental formability analysis of aluminum 3105 sandwich panels produced by continuous hot-press forming

    Authors: ELİBOL ÇAĞATAY, Wapande Sadam Hamis, Index Type: SCI-Expanded kapsamındaki dergilerde yayımlanmış tam makale, Type: people.with_referee, Journal Name: Materials Testing, Number of Authors: 2, Month: Januar, Language: Türkisch, Volume: 64, Page: 11-23, Doi: 10.1515/mt-2021-2003, ISSN: 0025-5300, Access Type: Elektronisch, Article Link: http://dx.doi.org/10.1515/mt-2021-2003 , Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Malzeme Karekterizasyonu>Malzeme Bilimi>Kompozit Malzemeler, Article Type: Originalartikel,

    (2021) Investigation of Cu whisker growth by molecular beam epitaxy

    Authors: ELİBOL ÇAĞATAY, Strunk H.P., Index Type: SCI-Expanded kapsamındaki dergilerde yayımlanmış tam makale, Type: people.with_referee, Journal Name: Materials Testing, Number of Authors: 2, Month: Dezember, Language: Englisch, Issue: 12, ISSN: 0025-5300, Access Type: Printversion+Elektronisch, Article Link: http://dx.doi.org/10.1515/mt-2021-0047 , Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Nanomalzemeler>Fiziksel Metalurji >Malzeme Karekterizasyonu, Article Type: Originalartikel,

    (2021) Effect of extruded low-density polyethylene on the microstructural and mechanical properties of hot-press produced 3105 aluminum composites

    Authors: Wapande Sadam Hamis, ELİBOL ÇAĞATAY, Konar Murat, Index Type: SCI-Expanded kapsamındaki dergilerde yayımlanmış tam makale, Type: people.with_referee, Journal Name: Materials Testing, Number of Authors: 3, Month: Januar, Language: Englisch, Volume: 63, Special Issue: Not Exists, Page: 34-40, Doi: 10.1515/mt-2020-0005, ISSN: 2195-8572","0025-5300, Access Type: Elektronisch, Article Link: http://dx.doi.org/10.1515/mt-2020-0005 , Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Originalartikel,

    (2021) Superelastic anisotropy and meso-scale interface regions in textured NiTi sheets

    Authors: ELİBOL ÇAĞATAY, Index Type: SCI-Expanded kapsamındaki dergilerde yayımlanmış tam makale, Type: people.with_referee, Journal Name: Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Number of Authors: 1, Month: Januar, Language: Türkisch, Volume: 36, Issue: 4, Page: 2121-2133, Doi: 10.17341/gazimmfd.754732, ISSN: 1300-1884, Access Type: Elektronisch, Article Link: http://dx.doi.org/10.17341/gazimmfd.754732 , Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Fiziksel Metalurji >Malzeme Karekterizasyonu>Nanomalzemeler>Tekstür, Mekanik Özellikler , Article Type: Originalartikel,

    (2018) Virtual Extensometer Analysis of Martensite Band Nucleation, Growth, and Strain Softening in Pseudoelastic NiTi Subjected to Different Load Cases

    Authors: ELİBOL ÇAĞATAY, Wagner MFX, Index Type: SCI-Expanded kapsamındaki dergilerde yayımlanmış tam makale, Type: people.with_referee, Journal Name: Materials, Number of Authors: 2, Month: August, Language: Englisch, Volume: 11, Issue: 8, Special Issue: Not Exists, Page: 1458-, Doi: 10.3390/ma11081458, ISSN: 1996-1944, Access Type: Elektronisch, Article Link: http://www.mdpi.com/1996-1944/11/8/1458 , Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Originalartikel,

    (2017) Deformation Analysis Of Pseudoelastic Niti Shape Memory Alloys

    Authors: ELİBOL ÇAĞATAY, Pouya Mina, Wagner MFX, Index Type: Endekste taranmıyor, Type: people.with_referee, Journal Name: IOP Conference Series Materials Science and Engineering (Sistemde olmayan dergi), Number of Authors: 3, Month: Mai, Language: Englisch, Special Issue: Not Exists, Doi: 10.1088/1757-899x/181/1/011002, ISSN: 1010881757-8991811011002, Access Type: Elektronisch, Article Link: https://iopscience.iop.org/article/10.1088/1757-899X/181/1/011002 , Sponsor: DEUTSCHE FORSCHUNGSGEMEINSCHAFT (DFG), Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Aufsatz,

    (2017) Relaxation behavior of martensitic NiTi SMA wires in tension

    Authors: ELİBOL ÇAĞATAY, Wagner MFX, Index Type: İlgili alanda önde gelen ülkelerin hakemli bilimsel/mesleki dergilerinde yayımlanmış tam makale, Type: people.with_referee, Journal Name: ASM International - International Conference on Shape Memory and Superelastic Technologies, SMST 2017, Number of Authors: 2, Month: Mai, Language: Englisch, Volume: 2017, Issue: null, Special Issue: Not Exists, Page: 25-, ISSN: 978-1-51084-942-6, Access Type: Printversion, Sponsor: DEUTSCHE FORSCHUNGSGEMEINSCHAFT (DFG), Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Aufsatz,

    (2017) Understanding complex stress states in pseudoelastic shape memory alloys-macroscopic modeling considering localization and tension-compression asymmetry

    Authors: Pouya Mina, ELİBOL ÇAĞATAY, Wagner MFX, Index Type: İlgili alanda önde gelen ülkelerin hakemli bilimsel/mesleki dergilerinde yayımlanmış tam makale, Type: people.with_referee, Journal Name: ASM International - International Conference on Shape Memory and Superelastic Technologies, SMST 2017, Number of Authors: 3, Month: Mai, Language: Englisch, Volume: 2017, Issue: null, Special Issue: Not Exists, Page: 167-, ISSN: 978-1-51084-942-6, Sponsor: DEUTSCHE FORSCHUNGSGEMEINSCHAFT (DFG), Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Aufsatz,

    (2016) Piezoresistive characterization of multi-walled carbon nanotube-epoxy based flexible strain sensitive films by impedance spectroscopy

    Authors: ŞANLI ABDULKADİR, Müller Christian, Kanoun Olfa, ELİBOL ÇAĞATAY, Wagner MFX, Index Type: SCI, Type: people.with_referee, Journal Name: Composites Science and Technology, Number of Authors: 5, Month: Januar, Language: Englisch, Volume: 122, Special Issue: Not Exists, Page: 18-26, Doi: 10.1016/j.compscitech.2015.11.012, ISSN: 02663538, Access Type: Elektronisch, Article Link: https://linkinghub.elsevier.com/retrieve/pii/S0266353815301329 , Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Originalartikel,

    (2015) Strain rate effects on the localization of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression–shear

    Authors: ELİBOL ÇAĞATAY, Wagner MFX, Index Type: SCI, Type: people.with_referee, Journal Name: Materials Science and Engineering: A, Number of Authors: 2, Month: September, Language: Englisch, Volume: 643, Special Issue: Not Exists, Page: 194-202, Doi: 10.1016/j.msea.2015.07.039, ISSN: 09215093, Access Type: Elektronisch, Article Link: https://linkinghub.elsevier.com/retrieve/pii/S092150931530191X , Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Originalartikel,

    (2015) Investigation of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression–shear

    Authors: ELİBOL ÇAĞATAY, Wagner MFX, Index Type: SCI, Type: people.with_referee, Journal Name: Materials Science and Engineering: A, Number of Authors: 2, Month: Januar, Language: Englisch, Volume: 621, Special Issue: Not Exists, Page: 76-81, Doi: 10.1016/j.msea.2014.10.054, ISSN: 09215093, Access Type: Elektronisch, Article Link: https://linkinghub.elsevier.com/retrieve/pii/S0921509314012970 , Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Originalartikel,

    (2014) Gradierte Metallstrukturen mit Kunststoffanbindungen

    Authors: ELİBOL ÇAĞATAY, Constanze Berndt, Claudia Drebenstedt, Wagner MFX, Drossel Welf Guntram, Index Type: İlgili alanda önde gelen ülkelerin hakemli bilimsel/mesleki dergilerinde yayımlanmış tam makale, Type: people.with_referee, Journal Name: Lightweight Design, Number of Authors: 5, Month: Februar, Language: Deutsch, Special Issue: Not Exists, Doi: 10.1365/s35725-014-0319-8, ISSN: 1865-4819, Access Type: Printversion, Sponsor: DEUTCHE FORSCHUNGSGEMEINSCHAFT (DFG), Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Originalartikel,

    National

    (2021) Effect of Severe Plastic Deformation on the Mechanical and Electrical Properties of Cr-modified Cu-Ni-Si Alloys

    Authors: ELİBOL ÇAĞATAY, Index Type: TR DİZİN, Type: people.with_referee, Journal Name: European Journal of Science and Technology, Number of Authors: 1, Month: November, Language: Englisch, Issue: 27, Page: 866-872, ISSN: 2148-2683, Access Type: Elektronisch, Article Link: http://dx.doi.org/10.31590/ejosat.1004910 , Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Malzeme Bilimi>Metal Alaşımlar>Fiziksel Metalurji >Copper alloys, Severe plastic deformation (SPD), Equal channel angular pressing (ECAP), Mechanical and electrical properties, Preci, Article Type: Originalartikel,

    (2020) Relationship between Mechanical Behavior and Macroscopic Deformation Mode of Ti-6Al-4V Alloy Processed by ECAP

    Authors: ELİBOL ÇAĞATAY, Index Type: TR DİZİN, Type: people.with_referee, Journal Name: Afyon Kocatepe University Journal of Science and Engineering, Number of Authors: 1, Month: November, Language: Türkisch, Special Issue: Not Exists, ISSN: 2149-3367, Access Type: Printversion+Elektronisch, Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği, Article Type: Originalartikel,

  • International

    Analysis of Dislocation-twin Interaction in NiTi Martensites during Stress Relaxation

    Authors: Wagner MFX, ELİBOL ÇAĞATAY, Type: Zusammenfassender Bericht, Event Name: ICOMAT2022 16th International Conference on Martensitic Transformation, Event Start Date: 13/03/2022, Event End Date: 18/03/2022, Number of Authors: 2, Language: Englisch, Publication State: Published, Published Date: 19/03/2022, Special Issue: Not Exists, Access Type: Elektronisch, Article Link: https://www.icomat2022.org/ , Country: SOUTH KOREA, Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Metal Alaşımlar>Malzeme Bilimi>Malzeme Karekterizasyonu,

    Electrical conductivity and aging kinetics of precipitation hardening CuCoNiBe alloys processed by ECAP

    Authors: ELİBOL ÇAĞATAY, Type: Zusammenfassender Bericht, Event Name: IMSTEC'21 6. International Material Science and Technology Conference, Event Start Date: 26/11/2021, Event End Date: 28/11/2021, Number of Authors: 1, Language: Englisch, Publication State: Published, Published Date: 30/11/2021, Special Issue: Not Exists, Access Type: Elektronisch, Article Link: http://www.imstec.org/yazim_formatlari/PROCEEDINGS%20BOOK.pdf , Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Malzeme Bilimi>Malzeme Karekterizasyonu>Metal Alaşımlar,

    Effect of high-temperature multi-pass ECAP on mechanical properties of quadruple copper alloys

    Authors: ELİBOL ÇAĞATAY, Type: Zusammenfassender Bericht, Event Name: 5th International Symposium on Multidisciplinary Studies and Innovative Technologies ISMSIT2021, Event Start Date: 21/10/2021, Event End Date: 23/10/2021, Number of Authors: 1, Language: Englisch, Publication State: Published, Published Date: 26/10/2021, Special Issue: Not Exists, Access Type: Elektronisch, Article Link: http://www.ismsitconf.org/ismsit2021/ISMSIT_2021_abstracts_book.pdf , Country: TURKEY, Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Metal Alaşımlar>Nanomalzemeler>Malzeme Bilimi,

    Severe Plastic Deformation of Precious Metals by Equal Channel Angular Pressing

    Authors: ELİBOL ÇAĞATAY, Type: Zusammenfassender Bericht, Event Name: International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’2020), Event Start Date: 24/06/2020, Event End Date: 26/06/2020, Number of Authors: 1, Language: Englisch, Publication State: Published, Published Date: 30/06/2020, Special Issue: Not Exists, Access Type: Printversion, Country: TURKEY, Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği,

    Design of Equal Channel Angular Pressing System and Production of Ultrafine-grained Materials

    Authors: ELİBOL ÇAĞATAY, Type: Zusammenfassender Bericht, Event Name: ICNHS-2020, Event Start Date: 22/05/2020, Event End Date: 23/05/2020, Number of Authors: 1, Language: Englisch, Publication State: Published, Published Date: 31/05/2020, Special Issue: Not Exists, Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği,

    Microstructure and mechanical properties of an 18-carat AuCuAg alloy after equal-channel angular pressing and subsequent aging

    Authors: Scholze M., Frint P., Fritsch Sebastian, ELİBOL ÇAĞATAY, Dietrich D., Wagner MFX, Type: Zusammenfassender Bericht, Event Name: EUROMAT 2019 EUROPEAN CONGRESS AND EXHIBITION ON ADVANCED MATERIALS AND PROCESSES, Event Start Date: 01/09/2019, Event End Date: 05/09/2019, Number of Authors: 6, Language: Englisch, Publication State: Published, Published Date: 12/09/2019, Special Issue: Not Exists, Access Type: Elektronisch, Article Link: https://euromat2019.fems.eu/abstract-book/ , Country: SWEDISH, City: Stockholm, Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Malzeme Bilimi>Malzeme Karekterizasyonu>Metal Alaşımlar,

    On the effect of equal-channel angular pressing on the mechanical properties and microstructural evolution of 18 kt gold

    Authors: Fritsch Sebastian, ELİBOL ÇAĞATAY, Frint Philipp, Wagner MFX, Type: Zusammenfassender Bericht, Event Name: Materials Science and Engineering (MSE), Event Start Date: 26/09/2018, Event End Date: 28/09/2018, Number of Authors: 4, Language: Englisch, Publication State: Published, Published Date: 28/09/2018, Special Issue: Not Exists, Access Type: Elektronisch, Article Link: https://www.mse-congress.de/index.php?id=5980L=0tx_dgmprogram_fullprogram5Bsession5D=4537tx_dgmprogram_fullprogram5Baction5D=showtx_dgmprogram_fullprogram5Bcontroller5D=SessioncHash=6c0dd74a405b61a95097ecbfc7c304e1 , Country: GERMANY, Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği,

  • (2022) WaxCelMet - Design and efficient manufacturing of cellular wax/metal structures for heat exchange and thermal energy storage applications

    Project State: in Bearbeitung, Project Budget: 1000000, Currency: Euro, Type of Project: Position in the Project: Projektleiter,

    (2022) Kurutucu Ön Yatağı Özelliklerine Uygun PP/PLA Matrisli SNK/SNF Katkılı Sürdürülebilir Hibrit Kompozit Üretimi ve Uygulaması

    Project State: in Bearbeitung, Type of Project: Position in the Project: Forscher,

    (2022) Katmanlı Üretim Teknolojisi İle Titanyum Yüzeyde Hücre Tutunumu Ve Çoğalmasını Sağlayacak Yapı İskelesine Sahip Fonksiyonel Omurga İmplantlarının Geliştirilmesi Ve Üretilmesi

    Project State: in Bearbeitung, Type of Project: Position in the Project: Betreuer,

    (2021) 2209-B Alüminyum Kompozit Panellerin İleri Mekanik Karakterizasyonu

    Project State: in Bearbeitung, Type of Project: Position in the Project: Betreuer,

    (2021) 2209-B Havacılık Sektöründe Kullanılan Alüminyum Alaşımlarının EKAP Yöntemi ile Termomekanik Olarak İyileştirilmesi

    Project State: in Bearbeitung, Type of Project: Position in the Project: Betreuer,

    (2021) İnsan Vücudu Hareketi İzleme Uygulamaları İçin Elektroeğirme Tekniği İle Üretilen Esnek Piezorezistif Kuvvet Sensörlerinin Sentezi Ve Karakterizasyonu

    Project State: in Bearbeitung, Type of Project: Position in the Project: Forscher,

    (2021 - 2022) Galvanizli Yassı Çelikler Üzerine Uygulanacak Hibrit Fonksiyonel Kaplamalar İle İnce Organik Film Kaplamalı Çelik Ürünler Geliştirilmesi

    Project State: Vollständig, Project Budget: 115.200, Currency: Turkish Lira, Type of Project: Position in the Project: Projektleiter,

    (2020) Demir Esaslı Metal Köpük Üretim Sisteminin Kurulması ve Elektromekanik Karakterizasyonu

    Project State: in Bearbeitung, Project Budget: 85.000, Currency: Turkish Lira, Type of Project: Position in the Project: Forscher,

    (2020) Atık NdFeB Mıknatıslardan Nadir Toprak Metal Oksitlerinin Geri Kazanımı ve Proses Optimizasyonu

    Project State: in Bearbeitung, Project Budget: 79.785, Currency: Turkish Lira, Type of Project: Position in the Project: Projektleiter,

    (2019 - 2021) Eş Kanallı Açısal Pres (EKAP) Yöntemiyle Üretilen CuCoNiBe alaşımının karakterizasyonu

    Project State: Vollständig, Project Budget: 65.000, Currency: Turkish Lira, Type of Project: Position in the Project: Projektleiter,

    (2020 - 2021) Turkish-German University Corrosion and Wear Testing, Research and Advanced Characterization Center ISTKA Güdümlü Proje Fizibilite Çalışması

    Project State: Vollständig, Project Budget: 400000, Currency: Turkish Lira, Type of Project: Position in the Project: Projektleiter, Academic Titles: Assistenzprofessor, Institution: TÜRK-ALMAN ÜNİVERSİTESİ,

    (2018 - 2018) Smart³ Materials Solutions Growth Development And Experimental Characterization Of Controllable High-load Shape Memory Actuators For The Automated Adjustment Of Machine Components And Large Components

    Project State: Vollständig, Project Budget: 150.000, Currency: Euro, Type of Project: Position in the Project: Forscher, Academic Titles: Assistenzprofessor, Institution: TÜRK-ALMAN ÜNİVERSİTESİ,

    (2016 - 2018) Severe Plastic Deformation (ecap: Equal Channel Angular Pressing) On Gold, Platinum And Titanium - On Behalf Of Varinor SA Delemont/Switzerland (A Swiss Luxury Goods Group Working With Specialist Watchmakers)

    Project State: Vollständig, Project Budget: 40.000, Currency: Euro, Type of Project: Position in the Project: Forscher, Academic Titles: Assistenzprofessor, Institution: TÜRK-ALMAN ÜNİVERSİTESİ,

    (2013 - 2018) Federal Cluster Of Excellence / Bundesexzellenzcluster (EXC1075) Merge Technologies For Multifunctional Lightweight Structures

    Project State: Vollständig, Project Budget: 40.000.000, Currency: Euro, Type of Project: Position in the Project: Forscher, Academic Titles: Assistenzprofessor, Institution: TÜRK-ALMAN ÜNİVERSİTESİ,

  • (2022) Handbook of Polymers in Medicine

    Authors: ŞANLI ABDULKADİR, ELİBOL ÇAĞATAY, AYDINOĞLU AYSU, Chapter Name: Biocompatibility of polymers, Type: wissenschaftliches Buch, Number of Authors: 3, Editor: Mozafari Masoud, Chauhan Narendra Pal Singh, Language: Englisch, Contribution Level: Kapitel, Publisher: Elsevier - Woodhead Publishing, ISBN: 9780128237977, Access Type: Printversion, Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği,

    (2022) Handbook of Polymers in Medicine

    Authors: ELİBOL ÇAĞATAY, Güner Mehmet Bugra, SAĞIR KADİR, Chapter Name: Processing and Characterization of Polymeric Biomaterials, Type: wissenschaftliches Buch, Number of Authors: 3, Editor: Masoud Mozafari, Narendra Pal Singh Chauhan, Language: Englisch, Contribution Level: Kapitel, Publisher: Elsevier - Woodhead Publishing, ISBN: 9780128237977, Access Type: Printversion, Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği,

    (2022) Malzemelerin Mekanik Özellikleri

    Authors: ELİBOL ÇAĞATAY, Type: wissenschaftliches Buch, Number of Authors: 1, Editor: , Language: Türkisch, Contribution Level: Alles, Publisher: EFE AKADEMİ YAYINLARI, ISBN: 978-605-73625-7-5, Access Type: Printversion, Country: TURKEY, City: İSTANBUL, Subject Matter Knowledge: Mühendislik Temel Alanı>Malzeme ve Metalurji Mühendisliği>Malzeme Bilimi>Metalik Malzemeler>Malzeme Karekterizasyonu>Mekanik Özellikler,

    (2019) Technologiefusion für multifunktionale Leichtbaustrukturen

    Authors: Drossel W.-G., Mehner J., Nestler D., Wagner MFX, Auerswald C., ELİBOL ÇAĞATAY, Helbig F., Kolonko A., Senf B., Chapter Name: Metallintensive Hybridtechnologien, Type: wissenschaftliches Buch, Number of Authors: 9, Editor: L. Kroll, Language: Deutsch, Contribution Level: Kapitel, Publisher: Springer Vieweg, ISBN: 978-3-662-54733-5, Access Type: Printversion+Elektronisch, Access Link: https://link.springer.com/book/10.1007/978-3-662-54734-2#toc, , Country: GERMANY, Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği,

    (2018) Lokalisierungs- und Relaxationsphänomene in pseudoelastischen und martensitischen NiTi-Formgedächtnislegierungen

    Authors: ELİBOL ÇAĞATAY, Type: wissenschaftliches Buch, Number of Authors: 1, Editor: , Language: Deutsch, Contribution Level: Alles, Publisher: TU Chemnitz Eigenverlag, ISBN: 1439-1597 (ISSN), Access Type: Printversion, Country: GERMANY, Subject Matter Knowledge: Mühendislik Temel Alanı->Malzeme ve Metalurji Mühendisliği,

Administrative Duty

2021 2024

Dekan Yardımcısı

TÜRK-ALMAN ÜNİVERSİTESİ, TÜRKİYE
2020 2021

Dekan Yardımcısı

TÜRK-ALMAN ÜNİVERSİTESİ, TÜRKİYE
2019 2022

Anabilim Dalı Başkanı

TÜRK-ALMAN ÜNİVERSİTESİ, TÜRKİYE
2018 30/12/9999

Endüstri İlişkileri Koordinatörü

REKTÖRLÜK
TÜRK-ALMAN ÜNİVERSİTESİ, TÜRKİYE

Expertises

  1. Mühendislik Temel Alanı - Malzeme ve Metalurji Mühendisliği (Malzeme Bilimi, Malzeme Karekterizasyonu, Metalik Malzemeler)

Contact

Contact details

E-Mail: elibol@tau.edu.tr


Office Address: : Fen Fakültesi, Dekanlık 3. Kat Oda No: 333 / 2. Kat Oda No: 213

Office Phone Number: : +902163333326

Internal: : 3303 - 3326

Office Room Number: : 213 - 333